All steel ventilation cabinet is made of high-quality cold-rolled steel plate after welding and epoxy resin spraying. It is one of the laboratory local ventilation equipment in the laboratory industry today. It is visually flat without solder joints. All water, electricity and gas circuits are safe, applicable and concealed for installation. It is equipped with removable maintenance holes.

Product material configuration details:

1. Shell: 1.0mm high-quality cold-rolled steel plate is used for forming after CNC center, cutting, positioning and punching, bending and welding;

2. Inner shell: 5mm gray white anti bent plate;

3. Fluorescent lamp: the fluorescent lamp is hidden on the panel, does not contact with the gas in the fume hood, and is easy to replace. One 30W fluorescent lamp with 5mm toughened glass;

4. Handle: stainless steel matte handle;

5. Guide plate: 5mm gray white anti bet plate is a special anti-corrosion material for the laboratory;

6. Power supply: the power supply adopts the special power socket for the laboratory;

7. Window: it adopts aluminum profile and plastic profile frame. Depending on the window, it adopts single 5mm safety glass, or three 5mm safety glass, moving left and right. Single block adopts non breaking balance device, which can move up and down and adjust freely;

8. Adjustment foot: injection molding with a diameter of 10 mm is used to adjust the foot, which is shockproof, moisture-proof and corrosion-resistant. The height of the cabinet can be adjusted appropriately according to the indoor floor conditions, with a range of 0-30 mm;

9. Gas collecting hood: PP material;

10. Distribution box: meet the requirements of 220v-380v power supply, with leakage and motor protection devices;

11. Control switch: 12V touch switch to control the whole circuit.