An overview of the

- UFZ series with magnetic flap top level gauge is should be user needs on underground container opening position requirements and development of a new generation of liquid level meter, compared with UIZ built-in type liquid level, low price, and can apply to flammable, toxic, corrosive and volatile environment is UFZ special type of magnetic level gauge turning, reliable, convenient observation, clear liquid level indicator, etc, are widely used in oil depot, such as underground storage tanks, tank containers and food, chemical industry, fertilizer industry, etc, on the level gauge at the same time with related accessories, also has the function of control signal output.

The working principle of

Top with magnetic flap liquid level gauge by ontology (composed of upper and lower tube), the flap box (consists of red, white double color small magnetic flap), float (composed) magnet, plunger, buoy, etc, and its structure as shown in the figure, the working principle is: the container of the buoy (according to different medium and the pressure for development), the catheter, along with the change of liquid level height floating up and down and through the plunger, the magnet on the intraductal move up and down, prompting the outside flap to turn over with red, white color to indicate that the liquid level height.

3. Working temperature (℃):-40 ~ 350 4. Pressure rating (MPa):≤32 5

Characteristics 1. When the container is not suitable for side opening and there is little space around the container, the liquid level meter of this form can be installed in the upper or lower part of the container. 2

1. Anticorrosive nominal pressure ≤ 1.0mpa. 2. The level gauge has a certain blind spot, so the value of the blind spot should be added when reading the level height (when the factory's level gauge leaves the factory, the zero of the scale scale has been transferred to the actual value). 3. The measuring range of the level gauge shall not exceed 5 meters, otherwise the stability, reliability and fastness of the level gauge will be affected. 4. Install the connection flange, and make it according to hg21592-97.

Installation, use and maintenance 1. The level gauge protector and the main catheter should be kept vertical 2. The connecting rod should not be bent and inserted straight.