- details of the ybs-wy digital manometer

-ybs-wy series digital pressure gauge is a new type of test instrument that our company is engaged in production and development, and its cost performance is better than similar products of Druck factory in Britain. Digital manometer not only solves the calibration of standard pressure, but also better meets the need of field comprehensive testing. The digital manometer has the basic accuracy of 0.1% and 0.05%, which is an ideal high-grade tool table for laboratories, factories, colleges and universities. 1. The high performance microprocessor continuously corrects the zero point and linearity of the instrument to ensure that the zero point and accuracy of the instrument have good repeatability and stability for a long time, and the measurement accuracy is high. 2. High performance CPU and temperature sensor are used to automatically compensate the temperature drift of the instrument to ensure a wide range of operating temperature under the accuracy. 3. Low power consumption. After the battery is fully charged, the continuous working time under the accuracy is guaranteed to be long. 4. Constant current charging, with the function of automatic shutdown and automatic protection of over-charging and under-voltage of the battery voltage, to ensure that the battery will not be damaged due to over-charging or under-voltage, and the battery will have a long service life. 5. Low voltage automatic protection function of micro power consumption ensures that the battery will not be damaged due to low voltage even if the operator keeps on the device for too long. 6. The meter has a rich range of functions, with multiple display styles, which can display pressure current, pressure water column or pressure KGF/cm2 current percentage at the same time. 7. The instrument has the alarm function of exceeding the RANGE. When the added pressure exceeds the rated full RANGE +2500 words, the instrument will display OVER RANGE! P and the built-in buzzer will sound intermittently to indicate that the pressure (current) exceeds the full range. The pressure should be stopped and part of the pressure should be removed to make it within the specified range, so as not to damage the pressure sensor. When the current measured by the meter exceeds 22mA, the meter will display OVER RANGE! I and the built-in buzzer will sound intermittently to indicate the measured current overrange. 8. The software is rich in content, simple and clear to operate. 9. Use thin film panel and imported light touch start, novel style, long life of the keys. 10 LCD backlight pressure, current display, intuitive, clear, compact and reasonable structure. Small size, light weight, easy to carry. 11. Manual pressure generator is installed on the front panel, with fine-tuning and vent valve. Manual vacuum rate up to 95%, with the world's advanced level. Pressure source parts through fine grinding, good air tightness, in line with IP54 sealing standards. 12. It can be operated directly on the panel to adjust the full range. 13. Metal case, strong anti-interference, strong impact resistance. 14. Volumetric fine-tuning and easy to implement fixed-point pressure. Second, the technical indicators: 1, the pressure range: - 95 kpa, and 2 ~ 2.5 MPa resolution of pressure 1 mu A 3 Min Min 1 pa current, current measuring range: 0 ~ 22 ma 4, dc output: 24 VDC 5, accuracy, pressure: FS0.05%0.1% FS power: 0.05% plus or minus 1 d 6, temperature range: 5 ~ 7 ℃, 50 dc working hours: 8, 10 hours or more showed that pressure, current dual display 9, relative humidity: ≤80%RH 10, overload capacity: 1.2 ~ 1.5 times of the upper limit of the range, dimensions: 240×80×140mm 12, weight: 2.5kg 13, power and power consumption: 220VAC 50HZ 3VA.