function

1. 100A intelligent light column displays the signal input of the regulator, and the user can choose at will. (thermocouple, thermal resistance, voltage, current, linear resistance, frequency).

2. The measurement value and set value of 100A intelligent light column display regulator can be displayed by analog bar and digital screen, and the display content can be switched at will.

3. The measured value and the set value can be added or subtracted.

4. Choose 8 alarm control methods.

5. Square root and small signal excision can be performed.

6, switch power meter can have 5 switch output, one for the input part of the broken line, the other 4 for the bit control.

7. The relay can choose the output state in case of fault of break resistance, break couple or break line.

8. Counter and reversible counter instrument can be used. After power failure, the power can be turned on again to restore the counting value before power failure.

9. Related alarm control mode can be realized.

10. Supply 24V, 30mA, 50mA or 100mA power supply (can be used as two-wire transmitter power supply).

11. The output of the measured value or the given value is transmitted :0 ~ 10mA, 4 ~ 20mA, 0 ~ 5V, 1 ~ 5V, 0 ~ 10V.

12. Multi-host, single host and no host RS485 asynchronous serial communication can be provided. Communication data calibration follows crc-16 us data communication standard, high reliability cycle, bar code calibration.