Hello! Main Products: Anticorrosive Materials, Heat Preservation Materials, Waterproof Materials, etc

Display instrument series

hotsearch
15611924211693.jpg
  • 15611924211693.jpg

XTRM remote monitor

cpfl:
XTRM remote monitor adopts advanced microprocessor for intelligent control, which is suitable for di…
Description

A list,

XTRM remote monitor adopts advanced microprocessor for intelligent control, which is suitable for display and control of temperature, humidity, pressure, liquid level, instantaneous flow rate, speed and other physical measurement signals. The XTRM remote monitor can perform high-precision linear correction for various nonlinear input signals. Intelligent digital control, measuring range can be set single ***. There are two kinds of control output: output of each cycle/output of remote transmission; The higher measurement point after multi-channel comparison is taken as the output (remote transmission and transmission output). The input/output circuit adopts photoelectric isolation, which has good anti-interference ability. With high brightness LED digital display, pointer display two. The whole machine adopts wall-mounted structure (length × width × height =160×110×70mm), which is easy to install.

This product can measure 2 to 4 measuring points at the same time, and after comparing the temperature in each measuring loop, take one point of higher temperature as the output, you can see the temperature of each point one by one by pressing the button in the field.

Ii. Main technical performance of XTRM remote monitor:

 

The input signal

1 ~ 4 road circuit measurement model fitting quantity thermocouple: standard thermocouple, B, S, E, J, K, T, WRe electric resistance: standard thermal resistance -- Pt100, Cu50, Cu100, far eastone pressure resistance - 30 ~ 350 Ω current: 0 ~ 10 ma, 4 ~ 20 ma (input resistance 250 Ω) or less voltage: 0 ~ 5 v, 1 ~ 5 v, mV (input impedance Ω 250 K or higher)

The output signal

Analog output DC 4 ~ 20 ma (load resistance Ω 500 or less) DC 0 ~ 10 ma (load resistance Ω 750 or less) DC 0 ~ 5 v DC output resistance (250 Ω or less) 1 ~ 5 v (250 Ω output resistance or less)

features

Measurement accuracy: ±0.2%FS or ±0.5%FS; Digital display of resolution :±1 word display range :-1999 ~ 9999; (or special requirements) displays 0.8 inches high brightness LED double digital display leds work status display measurement channel number 1 ~ 4 channel shielding and locking display temperature compensation 0 ~ 50 ℃ temperature automatic compensation parameters setting panel light touch button digital setting parameters set data after power save Settings password lock power supply under-voltage protection way automatic reset work abnormal automatic reset

Using the environment

Ambient temperature -25℃ ~ 80℃ relative humidity ≤90% RH avoid strong corrosion gas supply voltage conventional type ·AC 220V % (50Hz±2Hz, linear power supply) special type ·AC 90 ~ 265V (switching power supply) ·DC 24V±2V

The product selection

 

XTRM - () () / 2 G

The channel number

2

The number of channels is 2

3

The number of channels is 3

4

The number of channels is 4

The input type

2

Hot resistance: Pt100

Temperature range

10

0 ~ 100 ℃

15

0 ~ 150 ℃

The output form

G

4 ~ 20 ma

The power supply

D

DC24V (omitted)


Browse:
Return To The Top

分享到: