Groove bridge
- cpfl:
Groove bridge is a fully enclosed cable tray, with a cover plate, using quantitative connection bolt…
Description
Groove bridge is a fully enclosed cable tray, with a cover plate, using quantitative connection bolt, it is suitable for computer cable, communication cable, themocouple cable and other high sensitive system control cable, etc., it to the interference of control cable and cable corrosion environment protection has good effect, structure and beautiful, strength, convenient installation. Slotted bridge type selection parameters list:
| Xqj-c-1a slot straight through | Xqj-c-2a horizontal curve pass | Xqj-c-3a level tee |
| Xqj-c-4a level quad-pass | Xqj-c-4b vertical equal diameter quadway | Xqj-c-06a, B, C, D reducing joints |
| Xqj-c-3g vertical equal diameter tee | Vertical equal diameter tee on xqj-c-3b | Xqj-c-3c vertical equal diameter tee |
| Xqj-c-2b vertical isometric upcurved pass | Xqj-c-2c vertical isometric downcurved pass | Xqj-c-2d vertical isometric lower left curved pass |
| Xqj-c-3d vertical equal diameter tee | Xqj-c-3e bottom vertical tee | Xqj-c-3f vertical equal diameter tee at upper Angle |
| Xqj-c-2e vertical isometric right lower curving pass | Xqj-c-2f vertical isometric upper left curved pass | Xqj-c-2g vertical equal diameter upper right curve |
Groove bridge types and varieties of choices: 1, the cable network to electrical interference or a protective external (such as: corrosion liquid, flammable dust environment) such as impact, should choose slot composite anticorrosion cable tray (with cover) 2, strong corrosive environment (F) class should be used in composite epoxy anticorrosive flame retardant cable tray. Support arm, support should also choose the same material, to improve the service life of the bridge and accessories, cable bridge in easy to accumulate ash and other need to cover the environment or outdoor place appropriate to add cover plate. 3. In addition to the above situation, tray, trough, ladder, glass anticorrosive and flame retardant cable bridge or steel common bridge can be selected according to the site environment and technical requirements. It is recommended to add cover board in the environment or outdoor place where ash is easily accumulated and other areas need to be covered. 4, in the public channel or outdoor across the road section, the bottom of the bottom ladder should be added pad or use pallets in this section. When the long span spans the public channel, the load capacity of the grooved bridge can be increased or the rack can be selected according to the user's requirements. 5, long span (>3m) to choose composite bridge. 6, outdoor to choose the composite epoxy tree bridge.
The protective cover of trough type bridge frame is supplied with the tank body, other accessories and ladder type, tray type bridge frame are common. If you need the cable tray type specifications can come to the letter or face to order
Browse：
On A：Flame retardant fiberglass cable tray
Next：No
