Crosslinked power cables
- cpfl:
Description
Product description: |
This product is manufactured in accordance with GB1270 "plastic insulated power cable with copper and aluminum core rated voltage 35kV and below", and can be manufactured in accordance with IEC, British standard, German standard and American standard as recommended by the international electrotechnical commission. |
YJV | YJLV | YJY | YJLY |
YJV22 | YJLV22 | YJV23 | YJLV23 |
YJV23 | YJLV23 | YJV33 | YJLV32 |
YJLV33 |
Scope of application: this product is suitable for power distribution line distribution with rated power frequency voltage 3.6/ kv-26/35kv. Service characteristics: the rated power frequency voltage Uo/U is 3.6/6kv-26/35kv. ● permissible long term * high operating temperature of cable conductor is 90℃. ● in the case of short circuit (* long duration not exceeding 5s), the *** high temperature of the cable conductor shall not exceed 250℃. ● the ambient temperature during cable laying shall not be lower than 0℃. Cable bending radius: three-core cable shall not be less than 15 times of the outer diameter of the cable; A single-core cable shall not be less than 20 times the outer diameter of the cable.
Selection of cable rated voltage
● the rated voltage of the cable shall be suitable for the operating condition of the cable system, expressed as Uo/U (Um) KV. Uo-- rated power frequency voltage between conductors for cable design to ground or metal shielding; U-- rated power frequency voltage between conductors for cable design; Um-- the * large value of "* high system voltage" that the device can withstand.